Large fire brick for Villager Puffin multi fuel stove

This large firebrick for Villager Puffin stoves measures 9 by 6 by 1 inches. This brick is used at the rear of the stove and only one of these bricks is needed. In the Puffin there are 6 bricks to install. No. 1 is 150mm wide. No. 6 is 100mm wide. All the others are standard 115mm wide bricks. Place Nos. 1& 2 vertically at the back of the stove standing on the grate support brackets. Nos. 3, 4, 5 and 6 are placed vertically behind the retaining clips on each side of the stove and standing on the grate support brackets (Nos. 3 & 4 hold Nos. 1& 2 in position). Please note that No. 6 (the 100mm brick) must be in this position to enable the door to latch.

Technical data

• Depth: 25mm
• Height: 230mm
• Width: 150mm